Sensus Audio - Premier Australian Audiophile HiFi Dealer

accustic arts amp1

Acoustic Arts AMPIII

AMP III highlights

Dual-mono high-power amplifier with completely isolated power supply for each amplifier channel

48 selected MOS-FET output transistors of highest quality with a maximum power output of 1,000 watts per channel (4 ohms)

Magnetically shielded and encapsulated toroidal core transformer of premium quality for highest output reserves

Maximum total transformer power: 3,200 VA (1,600 VA per channel)

Optimum smoothing thanks to more than 240,000 µF power supply capacity;
premium quality capacitors „made in Germany“

Integrated protective circuit against clipping, HF oscillations and too high DC offset

Very high damping factor

Integrated switch-on current limitation for highest operational safety

Perfect for Super-Audio CD® (SACD)

Balanced XLR-inputs

Very high quality, gold-plated bi-wiring/bi-amping speaker terminal from WBT®,
the top German manufacturer

Cover with integrated AMP III logo made of massive aluminium

Full metal housing for optimum shielding

ACCUSTIC ARTS® AMP III is "Handmade in Germany“

TECHNICAL DATA

Voltage gain:	31.0 dB

Power consumption without load:	approx. 330 watts

Total transformer power:	maximum 3,200 VA (watts)

Power supply capacity:	more than 240,000 µF

Input impedance:	Pin 1 to Pin 2: 20 kΩ Pin 1 to Pin 3: 20 kΩ Pin 2 to Pin 3: 40 kΩ

Rated power output: (at THD+N = 0,1 %)	max. 2 x 1,000 watts on 4 Ω and 1 kHz max. 2 x 600 watts on 8 Ω and 1 kHz

Minimum speaker impedance:	4 Ω per channel

Rise time/fall time:	3.1 µs with 4 Ω load (square-wave 20 kHz, 12 Vss)

Crosstalk:	109 dB with 1 kHz

Signal to noise ratio:	-95 dBA (ref. 6.325 V)

Intermodulation distortion:	0.008 % with 10 watts on 4 Ω

Distortion factor (THD+N):	0.004 % on 4 Ω load with 1 kHz and 10 watts (effective bandwidth 22 Hz - 22 kHz)

Dimensions (H x W x D)	350 x 482 x 430 mm/13.8 x 19 x 16.9 inches

Weight:	approx. 60 kg/132 lbs.



Boulder 2008 Phono Pre In introducing the 2008 Phono Preamplifier, Boulder sets a new standard for vinyl reproduction of any vintage. It provides ultimate convenience and versatility for the dedicated record lover. The 2008 is equipped with inputs for three turntables. In addition to the standard RIAA, two optional equalization curves are available selectable from the front panel.	Boulder 2010 Isolated Balanced Pre The challenge of creating a truly neutral, remote controlled preamplifier has been achieved in the Boulder 2010. Luxurious in sight, touch and sound, the 2010 delivers the highest level of satisfaction. Luxurious in sight, touch and sound, the 2010 delivers the highest level of satisfaction. The gain stages are built entirely of discrete components. The original 990 series was developed in the best recording studios and used in the earliest Boulder power amplifiers.
Kharma Exquisite Reference 1d/1aFor many years the Exquisite Reference has been Kharma's flagship, and the reference speaker for many a audiophile. Until the development of the Grand it has been the ultra-high-end product of Kharma.	Continuum Audio Labs Caliburn & Cobra "The Caliburn-Cobra excelled at every aspect of vinyl reproduction. As the noise floor dropped lower than I had ever imagined possible, it dug new low-level information out of most records I played. I was constantly being surprised by musical information buried in the mix I’d never before heard. - Michael Fremmer Stereophile