Peak Consult Princess

Countless hours of measuring and Critical listening have gone into making the finest loudspeaker available. An impedance curve and electrical phase character like an electrostatic speaker, the final blend of art and technology have made The Princess floor stander an uncompromising work of art.

The Name
The Princess floor stander boasts an extremely linear frequency response, on-axis as well as of-axis. This makes it a very accurate loudspeaker in a “Real World” environment, becoming “InCognito” in almost every room. The Princess floor stander has a performance like a real Princess.

TECHNICAL SPECIFICATION


Enclosure
The multifaceted enclosure is handcrafted in our own facilities by Danish artisans in a 1” HDF sandwich material covered by 1” solid wood.
The design was made to optimise the off-axis response and to avoid diffraction. . In order to minimize acoustical waves, there are no parallel front, back, top or bottom panels. The slant of the front panel corrects the phase and timing between tweeter and woofer.

Transducers
The Scan-Speak tweeter is a non-Ferro fluid 1” hand coated silk dome with a SD-2 motor, low compression design, and non-resonant chamber. The tweeter performs effortlessly in sonic behaviours.
The 5” Audiotechnology midrange is hand built and specially designed for optimal effect in this enclosure. The driver features a cone that has been uniquely shaped for this moving system and a vented magnet system that includes Symmetric Drive to optimise the linear directivity.

Networks
The speaker includes an acoustical second order crossover. Every component has been chosen for its sonic and musical behaviour, with no consideration for cost. The crossover is hardwired with silver solder. The internal wire is an especially elliptical tube silver wire from Stereovox.

Specification

Design: 2-way Ported
Crossover Frequencies: 3.200 Hz
Frequency Range: 39 – 30000 Hz –3dB
Sensitivity: 88 dB @ 1W/1m.
Impedance: 6 ohm Linear down to 60 Hz
Dimension (H X W X D): 102 X 21 X 32 cm. – (41” X 8,3” X 12,6”)
Weight: 42 kg. –(93 lb.)
Finishes: Standard solid wood in: Ash or Rosewood
Premium solid wood in: Walnut
Custom solid wood in: Ash with Walnut stripes or Walnut
With Ash stribes.



German Physiks The Unicorn MKII On live recordings, such as Harry Belafonte Returns to Carnegie Hall [LSO 6007] or Chet Baker in Sweden [Dragon, DRLP 56], stray footfalls, hands tapping soundboxes, and so on form a continuous ambient seepage over the Unicorns. At the same time, the reverberant field that constitutes hall ambiance is followed down to the furthest
pianissimo level. - The Absolute Sound, DAN SWEENEY

Acapella LaCampanella"The Acapella LaCampanella is the best horn speaker I have experienced in memory. Never mind the LaCampella being a horn speaker, because they are one of the most differentiating in tonality among speakers I've used. Listening to music via the Acapella could drive a reviewer to retire, and I found myself listening harder to other speakers in constant search of a flamboyancy when the Acapella was taken out of the system." - by Constantine Soo September 3, 2005

Peak Consult Empress"If the standard is whether or not I would live with a speaker, the Empress is about as highly recommended as they come... ...Would I buy 'em if I had $25 grand? Oh, heavens to Betsy, yes. It wasn't love at first sight but I could listen to the Empress for a lifetime." - Wes Phillips,Stereophile

Kharma Ceramique 2.3"climb right into the venue of the music and watch the musicians perform. No other loudspeaker has done this for me. It is an extraordinary experience, way beyond the loudspeakers merely disappearing." - Enjoy the Music


About Sensus | Contact Us | TEL: 02-93888158 ©2006 Sensus Audio, Sydney, Australia contents may not be copied or reproduced without permission.

sensus menu