STEREOVOX COLIBRI-R

Colibri-R is the single-ended version of the Colibri interconnect, built from a twin-run of hollow, tubular copper conductors for signal delivery, each one discretely shielded. Terminated to Xhadow Reference RCAs in the ISC method, Colibri-R is truly a world-class interconnect! PTFE dielectric.

Stereovox Colibri & Firebird follow-up review- Tim Shea, SoundStage.com
http://www.soundstage.com/revequip/stereovox_colibri_r_firebird_followup.htm
These upgraded cables have unleashed more musical information than I’ve ever heard before through my system, and it sounds very, very right. Although I didn’t find all that much sonically different with the new Firebird speaker cable, it remains about as neutral an entry as I have heard in the category, which at the very least makes it a great match for the Colibri-R.Overall, the Stereovox Colibri-R interconnects and Firebird speaker cables are the best I’ve had in my system and reasonably priced to boot.

"There was a distinctly superior sense of dimension, balance, and "liveness" that drew me in more subjectively than objectively. Translation: I didn’t have to think about why I was enjoying the music and sound, I just was." - Soundstage, im Shea Read Review

The Colibri, the next step up in the line from the Vespa. Available in both RCA (Colibri-R) and XLR (Colibri-X) terminations, the Colibri cables represent a substantial improvement over the Vespa.

STEREOVOX COLIBRI-R

From 1997 to the present, Chris has dedicated his focus to creating the finest and most precise audio cables in the world under the STEREOVOX brand. Employing high technology precision solutions typically reserved for military, aerospace and surveillance industries, Stereovox cables are themselves extreme examples of precision audio cable design and execution.

Stereovox cables complete the rarest of reference audio systems, and bridge the gap between Audio and Music.

Technical Data

Our cables are grouped into different series, and geometries and technology can differ greatly depending upon the series. For instance: Analog cables in the Studio line employ tubular copper conductors in solid (high density) PTFE dielectrics, while cables from the Reference line use microfilar pure silver conductors encased in air-articulated (low density) PTFE dielectrics.

A word about connectors: We employ Xhadow connectors or our own Stereovox connectors [on Vespa only]. These connectors employ pure copper, plated in silver for the signal-conductors and are designed to allow for ISC soldered termination.

ISC stands for Intimately Stressed Contact, and it simply means that the signal wire and the connector it is attached to are not only in electrical contact with one another – but that they are contacting one another under extremely high stress. This guarantees that the connection, or “joint,” is a perfect one before any solder is applied. Thereafter, solder is applied to create a hermetic seal – never to act as an electrical bridge between wire and connector.

Stereovox Range

Also Cables from:

STEREOVOX COLIBRI-R